BOWMAN Ltd:

Bowman occupies a purpose built factory ideally situated centrally in the heart of the UK, from where it directly exports over 50% of its production.
Experience has shown us that there is rarely a need for purpose built Heat Exchangers; as such we have developed our own extensive range of standard designs, the majority of which can be supplied from our large stock facility.
Our policy of standardization which we follow for all our products ensures that our customers receive a Heat Exchanger of proven design and known characteristics at a competitive price...

Tube Heat Exchangers:

Are intended for heating or cooling process fluids, they are for example suitable for closed circuit cooling of electrical equipment using demineralised water and for cooling water soluble oil solutions in quenching tanks.

The shell side usually contains the process fluid and the tube side water from the town mains or a cooling tower, or an ethylene glycol solution from a chiller unit. In certain circumstances this flow arrangement can be reversed, but please consult us first.

Address: Chester Street, Birmingham, B6 4AP [Map], United Kingdom
Contact Now

UK Exchangers Ltd

UK Exchangers specialise in the design and manufacture of a wide range of Heat Exchangers for industrial, food, dairy, hygienic, refrigeration, HVAC and marine applications. Our objectives are to provide our customers with a rapid response to quotation requests, very competitive prices and the shortest-possible delivery times...

CORRUGATED TUBE IN TUBE HEAT EXCHANGERS:

UK Exchangers' Tube in Tube Heat Exchangers utilise corrugated tubes, which generate turbulence in both media to ensure uniform temperature distribution. This improves the heat transfer co-efficient by up to 60% compared to a conventional smooth tube design.

We offer two types of exchanger. The mono tube design has a single tube within a tube, and the multi-tube design has a number of tubes inside a shell.

Standard units can be connected in series and/or in parallel by means of 180° bends, to suit the specific design requirements. Multiple units can be supplied mounted on a stainless steel frame.

Advantages:
Uniform temperature distribution and thermal processing
Increased run times before cleaning is required, due to turbulent flow and reduced fouling
Up to 60% greater efficiency over a plain tube design, giving rise to much reduced exchanger size
Low maintenance cost - minimal spares required
No "dead spots" within the process circuit, thus responds extremely well to CIP

Mono-tube design
The mono-tube design is used to process fluids containing large particulates, fibres and cells up to 50 mm diameter including:

• Effluent water
• Dye-house effluent
• Digestion sludge
• Pet food
• Grain slurry
• Fruit pulps

The mono-tube unit is an all-welded tube in tube type exchanger. The process fluid passes through the inner tube, whilst the service media goes through the outer tube. Both inner and outer tubes can be corrugated.
For high temperature duties, expansion bellows are incorporated in the outer shell.

Multi-tube design
The multi-tube design is suitable for viscous media and media containing small particulates, including

• Dairy products
• Sugar syrups
• Purees · Sauces
• Juices
• Malt extracts
• Process water
• Paint
• CIP heaters
• Vegetable wash water
• Concentrates
• Tomato products

Address: Stilebrook Road, Olney Buckinghamshire MK46 5EA, England
Contact Now

Home